Free shipping to Most Of USA and EU areas
Contact us 24 hours a day, 7 days a week
Simply return it within 30 days for an exchange-3D Printer
We ensure secure payment with PEV
2024 New Printing PLA filament
[More time and energy saving] 0~100mm/s normal speed print quality is better than PLA, the surface is smoother, the overhang performance is better, the overhang angle is less than 70° can not be added support, greatly saving printing time and material waste. 180~195℃ low temperature fast printing, save time, more energy saving.
[Fluidity enhancement of 500%] No clogging during ≥250mm/s high speed printing, won't lack of material.
[Heat dissipation performance] The performance of Highspeed PLA increased by 180%, faster cooling under the same conditions, fast printing without piling up materials.
[High crystallization temperature] Fast curing speed. Rapid printing drape performance is better, (printer air cooling performance is excellent under the premise of draping angle less than 70° can not add support).
[Low shrinkage rate] Not easy to crack during fast printing, smooth surface.
[Neatly lined up] Uniform wire diameter, fast printing without knotting, even and smooth discharge.
{Large Capacity] Internal size 450*210*211mm, can dry 4 rolls of 1kg consumables at the same time, meet the user's multi-colour printing and multi-computer printing needs.
[Rapid heating] Built-in 300W PTC heater, heating to 50℃ in 30mins, faster and more efficient.
[3 levels of safety protection] PTC (Positive Temperature Coefficient Thermistor), temperature switch, and software triple protection, real-time temperature monitoring, and alarm prompts when the temperature is abnormal, for greater safety.
[Temperature Balance] The left and right side circulating fans and the bottom heating fan in the chassis ensure that the temperature in the chassis is balanced ±3℃, and every part of the consumables can get perfect drying effect.
[Adjustable humidity] Adjust the humidity in the chassis, the humidity in the box reaches the set value (30%-50%) will automatically start until the humidity drops to 25% and then stops, to better meet the humidity needs of different types of consumables.
[High compatibility] Support with all models of printers connected to the use; support 4 printers at the same time baking material printing; compatible with consumables wire diameter 1.75mm, 2.85mm, 3.0mm.
Name: S4-Filament Dryer
Model: S4-FD
Net weight: 4.8KG
Outer Size: 516*278*350mm
G.W.: 5.5KG
QTY/BOX: 1pc
Size: 458*218*312mm (including the height of the tripod)
Colour: Black
Maximum Capacity: 450*210*211mm
Power Input: AC 110V~240V 50Hz/60HZ
Rated Power: 320W
Contains:
1* S4 drying box, 1* power adapter, 1* user manual, 2* Teflon tubes (100cm), 4* Teflon tubes (8cm)
Warranty:
1 year warranty, the use of non-original brand power supply or not in accordance with the instructions for the correct operation of the damage caused by the warranty is not covered.
[High toughness, good strength]
Printing model is not easy to brittle break, printing structural parts are not easy to deformation. Toughness is stronger than ordinary washed photosensitive resins, and is consistent with the performance of ABS-like resins.
[Can be cleaned with water]
Cleaning effect is better than ordinary water washing resin, details are more clear. Higher hydrophilicity and cleaner with water
[Low shrinkage, good fluidity]
Printing success rate is high, the print model does not crack, and save for a long time.
[Strong compatibility]
99% of LCD printers on the market can print easily.
Can also be used for DLP and SLA printers.
[No Pungent Odor]
No uncomfortable odor during the printing process.